Screw air compressor contains oil in the exhaust volume. The compressed gas does not meet the standard and affects the air pressure opportunity, which not only affects the production and use, but also a serious waste, resulting in loss. Too big, the equipment is all useless. Therefore, for the air compressor, the oil content of the exhaust gas must be solved as soon as possible. The following is the reason why the air compressor maintenance manufacturer of the air compressor is introduced by DSNEair air compressor maintenance manufacturer and the solution. .

The reason for the high oil content and oil volume in the outlet of the screw air compressor:

1. The lubricating oil used is not qualified. It is recommended to use the special oil supplied by the manufacturer to be safer and more secure. .

Second, the return pipe may be blocked at 2mm, the return pipe is blocked or the return pipe is offset, the return pipe is bent or deviated from the bottom of the oil core, and the oil return check valve is blocked. It is recommended to check whether the air return pipe is blocked. Or offset.

3. The air compressor pressure maintenance valve setting value is too low, and the normal value is set between 0.45 and 0.55Mpa.

4. The air pressure of the air compressor oil is too high or the viscosity of the oil is too thin. This also means that the quality of the air compressor oil is not good.

5. The post-processing equipment of the screw machine is not fully drained. It is recommended to carry out effective sewage discharge regularly.

Six, the oil level is too high, and the quality of the oil is foamy.

The reason for the high oil content in the outlet of the screw air compressor can be extended. Another topic is the high oil content of the screw air compressor. The oil level is too high, and the oil is injected. Excessive; oil return pipe or oil return check valve blocked; exhaust pressure is too low when the unit is running; oil is incorrect, foam occurs; oil is deteriorated or overdue; oil core damage, cracking, etc. are all caused by screw air compressor row The reason for the high oil content of the gas.