1. Types of China Air Compressor —— Select the type of air compressor to first select the type of compressed air required for the machinery and equipment used.
2, confirm the pressure & mdash; & mdash; select the model and secondly need to confirm the common pressure (MPa) of the machinery and equipment used. 3. Confirm the amount of air used —— also check the amount of air used (L/min) of the machinery and equipment used.
4, select the required output power & mdash; & mdash; the fourth is to choose the required output power (kW.PS) depending on the pressure selected first and the amount of air used. 5. Select the compression method —— When there are multiple output power ranges, you must choose the most suitable compression method. 6, select the drive source & mdash; & mdash; selectable drive sources are: motor output power is divided into two types: one is 1.5kW three-phase 380V, the other is 1.5kW below single-phase 220V. 7, on the noise & mdash; & mdash; select the air compressor model also pay attention to the noise limit of the compressor use area. In the screw air compressor, the small noise value of the gas tank-mounted type is the largest, followed by the silent box type, and the scroll type is the smallest. 8. Finally, select the type of compressed air required for the machinery and equipment used, and also select accessories such as dryers, gas storage tanks and filters.

This article is edited and reproduced by China DSNEAIR Compressor Manufactory (https://air-compressor.net).